Cutting wheel machine safety operating procedures

- Apr 08, 2018-

The cutting wheel machine is the most commonly used power tool in the industrial field. To avoid safety accidents, everyone needs to know the basic safety operation procedures clearly.

1: Preparation before cutting

1.1.  Before use, the performance of the equipment must be carefully checked to ensure the integrity of the components.

1.2.  Check the power switch, blade tension, blade guard or safety fence for detailed inspection. The console must be stable.

1.3.  Before use, turn on the main switch, turn the test wheel for no load, and allow it to start before it is confirmed to be safe.

1.4.  Rail cutting wheel machine operator must bring a safety helmet to prevent being damaged by slag.


2:  Precautions during the cutting wheel machine using process 

2.1.  When the cutting wheel  machine is working, it must be engrossed in not only keeping the head clear, but also rationally operating the cutting wheel power tools. It is forbidden to use a cutting wheel machine after exhausting, drinking or taking stimulants and drugs.

2.2.  The power line must be safe and reliable. It is strictly forbidden to pull it by yourself and be careful not to cut off the power cord. Before use, the performance of the equipment must be carefully checked to ensure that the components are intact.

2.3.  Wear appropriate overalls. Do not wear loose overalls. Wear jewelry or long hair. Never wear gloves or cuffs.

2.4.  The workpiece must be firmly clamped, and the workpiece is forbidden to be cut when it is not clamped tightly.

2.5.  It is forbidden to grind the burrs of the workpiece on the plane of the grinding wheel and cutting wheel to prevent the grinding wheel from chipping.

2.6.  The operator must deviate from the front of the cutting wheel during the cutting process and wear safety glasses.

2.7.  It is strictly forbidden to use the worn-out cutting wheel and grinding wheel. When cutting, Mars should be prevented from splashing and away from flammable and explosive materials.

2.8.  When clamping the workpiece, it should be clamped firmly and securely. The protective cover must be installed correctly. After installation, it should be turned on and run to check. No jitter or abnormal noise is allowed.

2.9.  When replacing a new cutting disc or abrasive disc during the using process, do not use too much force on the locking nut to prevent accidental cracking of the cutting saw blade or cutting chop wheel .

2.10. Must firmly hold the cutting machine and cut it evenly and forcefully, and the fixed end must be solid and reliable.

2.11. Do not attempt to cut unswaged small parts or severely edged profiles.

2.12. Do not perform powerful saw operations. Wait until the motor speed reaches full speed before cutting.

2.13. No one is allowed to stand behind the saw, lose power and rest. When leaving the workplace, the power should be cut off immediately.

2.14. Do not operate the shield when it is not in place. Do not place your hand within 15 cm of the blade. Do not lean over or circumvent the saw machine. The body should be inclined at an angle of 45 degrees when operating.

2.15. If abnormal sounds occur, check immediately; the power must be turned off before repairing or replacing parts, and the abrasive cutting saw blade should be completely stopped.

2.16. When using a cutting wheel machine, such as working in a wet place, it must stand on an insulating mat or a dry wood board.

2.17.  If the equipment is subject to shaking or other malfunctions, it shall be immediately shut down and repaired. It is forbidden to bring sickness and post-drinking operations. It is forbidden to wear gloves during operation. If you get dust during operation, wear a mask or mask.

2.18. Turn off the power after processing, and clean the equipment and the surrounding area

Cutting wheel machine have some dangerous , so it must be handled by professionals. Any violation of the regulations will be at your own risk!  Please follow safety operating procedures to use cutting wheel machine during the using process