Precautions when use resin cutting discs to do grinding work

- Jul 01, 2018-

The resin cutting discs is widely used for cutting steel, but sometimes the resin cutting discs is used for grinding by some direct users. The resin cutting disc manufacturer JUMA ABRASIVE CO.,LTD show the precautions when use resin cutting discs to do grinding work. 

1. Before using cutting discs to do grinding work, the resin cutting discs should be idling for 1-3 minutes to observe whether the installation is reasonable and whether or not the operation is normal. When grinding, the operator should stand on the side of the direction of rotation of the cutting discs to prevent damage if the cutting discs fragments fly out.

2. The cutting machine of the grinding tool should have a movable bracket so that it can be adjusted at any time as needed. The gap between the bracket and the grinding wheel is usually 3 mm. Operators should wear protective glasses to prevent sand and debris from flying into the eyes.

3, the use of hand-held civil grinding wheel, in order to prevent electric shock accidents, must install a leakage protector.

4. It is not allowed to use the cutting discs to grind non-ferrous metals, wood, fiberboard, etc. Because the abrasives of these materials can easily block the grinding surface of the cutting discs, the grinding efficiency is reduced and the slip, vibration and noise are generated during grinding, which affects the quality and is prone to accidents.

5. After the cutting discs is blunt, it should be corrected by a special person. When the grinding wheel of the grinding tool has a horseshoe shape or a groove, it should be corrected in time to ensure the grinding efficiency and operation safety.

  The above is the precautions for the resin cutting disc during grinding process. If you have any other problems, you can contact us /JUMA ABRASIVE CO.,LTD  at any time.