ultra-thin cutting wheel safety precautions

- Apr 01, 2018-

ultra-thin cutting wheel is a special thin cutting wheel used in some special industrial area ,

in order to increase its safety factor,some details of ultra-thin cutting wheel safety precautions need to know and attention.

1: Before starting to use the ultra-thin resin cutting wheel, please idle for one minute before use. When replacing a new type of resin cutting piece, please idle for 3 minutes before use;

2: Be sure to use ultra-thin cutting wheel on the correct flange. No enhancement: 1/3 or more; enhanced: 1/4 the above;

3: When direct user use ultra-thin cutting wheel, the cutting wheel should be installed on angle grinder with safety cover, or cutting machine with safety cover;

4:Be sure to firmly fix the material to be cut during the cutting process;

5: Users must wear protective glasses, masks, ear plugs, gloves, dustproof clothing, etc., and take protective measures during the cutting process;

6:The resin cutting wheel should be stored the environment with direct sunlight, no moisture, and should be placed horizontally;

7: If the inner diameter of the resin cutting wheel is not matched with the equipment, please do not change the diameter of the cutting wheel;

8: Please use the ultra-thin resin cutting wheel according with the MAX.speed rotation;

9: Confirm  the resin ultra-thin cutting wheel has no edges, no cracks, no cracks, etc. before use

it on equipment;

10: Try not to use the side of the resin ultra-thin cutting wheel;

 Only noticed the ultra-thin cutting wheel safety precautions above, it can add a layer of security for your own safety during using the ultra-thin cutting wheel. 

As a high quality cutting wheel , grinding disc , abrasive flap disc direct manufacture , we can hlep you to get the best quality products .

Welcome your visit us in any time.