Depressed Center Cutting Disc T42 And Flat Cutting Wheel 9"(230x3.0x22.2mm)with 2 Net 2 Paper

- Feb 03, 2017-

Production Introduction

This Depressed Center Cutting Disc T42 and Flat Cutting Wheel 9"(230x3.0x22.2mm) is mainly made of white Aluminum Oxide abrasive material , 2 ~ 4 pieces Resin Bonded Fiberglass nets and two black paper backing. The Maximum speed of this Freehand Reinforced Cut-off Wheel reach 80m/s. The color of 9" Xtra Power cutting wheel can be black, red ,and yellow. 

The Depressed Center Cutting Disc 9"(230x3.0x22.2mm) belong to the Depressed Center Cutting Wheel. It can be used on freehand type 42 and Type27 Xtra Power angle grinder machine. It can be used for cutting, grinding, polishing and cleaning during the using process.

The Flat shpe Cutting Disc 9"(230x3.0x22.2mm) belong to the Flat Cutting Wheel. It can be used on freehand type 41 Xtra Power angle grinder machine. It can be used for cutting and cleaning during the using process.

Our Abrasive Cutting Wheel 9"x1/8"x7/8"(230x3.0x22mm) is widely used for cutting and grinding Mild steels, tool steels, construction steels, spring steels, stainless steels, cast steels. etc. At present , it is popular in the market for the main advantage as follows :

Multi-purpose using

Comfortable cutting and grinding experience

High metal removal rate , best stability,  best efficiency, 

Less material loss, noise and dust

Long life durability and Maximum safety

Package Introduction

In our company , carton box package are always be used on products . At the same time , we can also design the special package to pack the cutting wheel and grinding wheel , if customer have the demand.

The package of this Resin bonded cutting wheels 9"x1/8"x7/8"(230x3.0x22mm) as follows , 25pcs/ small box , 100pcs/ carton box .About the carton box and brand label design , we can also design them according with customers’ demands . 

Other Information of Our Resin Bonded Cutting Disc 9"x1/8"x7/8"(230x3.0x22mm)


WA--white aluminum oxide

Our   International Brand : 


Max   speed .:


OEM    Brand :


Fiberglass   Mesh:

2~   4 net, 2 black Paper

Color   :

Black   / red /yellow

Sample   :


Samples   Finished time :


Payment   Term

30%   deposit, 70% T/T before shipment

Order   delivery time :

Within   25days

Loading   Port

Shanghai   or others port

Place   of Origin:

Henan   Province , China

Quality Assurance

JUMA ABRASIVE CO., LTD have the strictly executes quality management system of ISO 9001 in company operation, equipped with advanced production facilities, has a leading level in product designing and development, and has a perfect and strict testing system for material collecting, procedure control, end-product testing and detailed records of production which have made the Company to be able to optimize its production mode successively so as to meet with higher requirements from the clients.

Production Capacity

JUMA ABRASIVE CO., LTD. has already owned 150 sets of advanced manufacturing production line,50 sets in our old factory and the 100 new full automatic production line were put into use in our new factory which have 70,000 square meters with the registered capital ¥15,000,000. The company owns the staff of more than 500, the middle and advanced engineers, technicians and skillful workers account for over 60% of the staff. 

JUMA ABRASIVE CO., LTD. can supply many kinds of abrasive products, such as cutting wheel, grinding disc, flap disc, flap wheel, abrasive fiberglass backings plate for flap disc , and so on.

Welcome your inquiry and visit !

Free samples can be supplied for your checking .

OEM brand products can also be supplied  for your using and sale.