Flap Disc With Different Backing Plate

- Feb 01, 2018-

As a high quality abrasive products manufacture , we can also manufacture abrasive flap disc . During the flap disc manufacture process , different customer have diffrent demands on the flap disc , such as the kind of flap disc backing plate , the flap size ( length x width) , the flaps number on abrasive flap disc and the kind of abrasive cloth , so that customers can ensure their order flap disc goods can meet their market need .  Now we show the diffrence of them 

According with the backing plate diffrence , the flap disc have three kind as follows 

1: steel backing plate flap disc 

微信图片_20180201093430_副本.jpg

This kind of flap disc have the steel backing plate . 

The advantage of this flap disc is that it can have best strength . The backing plate can have more cloth on it and the backing plate can load some special cloth during the flap disc manufacture process .  Because the cost of this flap disc is the highest, this backing plate flap disc are not so welcome in the market , unless some customer need this kind flap disc in some special market .

2: Fiberglass backing plate flap disc 

微信图片_20180201094549_副本.jpg

This kind of flap disc have the fiberglass backing plate  and this kind flap disc are popular in the market 

The advantage of this flap disc is that it can have diffrent  strength  by using diffrent layer glassbacking plate and the price cost of this flap disc is reasonable . 

In diffrent market , because the customer have the diffrent demand on the flap disc strength and the price , we always use diffrent layer fiberglass backing plate to manufacture the flap disc , so that we can ensure our flap disc not only can reach the MAX. speed rotation during the using process , but also ensure our customer have the better price to get their market easily . For examples on flap disc 100x16mm  ,

To Asian market,   we always use the fiberglass backing plate with 7+1 layers at least to manufacture this kind flap disc ;

To European market , because the higher speed rotation demanded from the user , we always use the fiberglass backing plate with 9+1 layers at least to manufacture the  flap disc; 

That's why one same type fiberglass backing plate  have different cost during the manufacture process in our factory .

Abrasive fiberglass backing plate used on flap disc 

Outer Diam.(mm)

Hole Diam(mm)

Size for flap discs

(mm, inch)

Type

Layers

Metal Rings

90-95

16.3

100 x 16

4 x 5/8

T27 or T29

5-9

1 or 2

105-108

22.23

115 x 22

4-1/2 x 7/8

T27 or T29

6-12

1 or 2

115-118

22.23

125 x 22

5 x 7/8

T27 or T29

6-12

1 or 2

140-141

22.23

150 x 22

6x 7/8

T27 or T29

6-12

1 or 2

170-171

22.23

180 x 22

7 x 7/8

T27 or T29

6-12

1 or 2




3: Plastic  backing plate flap disc 

微信图片_20180201100515_副本.jpg

This kind of flap disc have the plastic backing plate plate . About the color of this kind plastic backing plate , it can have red color , black color and blue color .  The advantage of the commom plastic backing plate flap disc is the lower price , but it can not have the good strengthen .  

This kind flap disc can help customer to get the market by lower price based on the same abrasive flap disc type with same abrasive cloth material . 

T27/T29 Abrasive Flap Disc

Outer size : 4 inch – 7 inch  ( 100mm、115mm、125mm、150mm、180mm)

Hole size : 16mm、22.2mm

Flap size and number : according with customers’ need


As a high quality abrasive products manufacture , JUMA ABRASIVE CO.,LTD not only can manufacture the best quality abrasive cutting wheelgrinding disc, abrasive flap disc and fiberglass backing plate , but also can help customer research and development new special products to sale .

We solemnly promise that, if any question of quality occurs to our products, we will shoulder the responsibility.  

Your requirements will be fully understood and 100% followed in case of order in JUMA ABRASIVE CO., LTD.

Free samples and OEM products with your own brand name can be supplied to every customer.

Welcome your visit and inquiry!